USB2.0+1394a+10/100 Ethernet PCI

Audio/Video	ExpressCard	PCI Express	PCI I/O	Bridge	Mac	CardBus/PCMCIA	1394a/1394b	Serial ATA
USB 2.0	Low Profile	POS I/O	Ultra ATA	Combo	Phase-Out

USB2.0+1394a+10/100 Ethernet PCI

Part No. 1016-0004-000B
USB-IF TID: 51000639
( Product may vary from this image.)

Key Features & Benefits:
	Combo card design adds USB 2.0, 1394 (FireWire®) and 10/100 Ethernet interface into your computer at once!
	Supports various types of USB 2.0/1.1 and 1394 devices including removable drives, CD-ROM/DVD-ROM drives, printers, scanners, memory card readers, hubs, digital cameras, DV-camcorders, PDA and more
	Full-duplex operation at both 10Mbps and 100Mbps
	Support 10/100 Mbps auto-sensing capability
System Requirements:
	Pentium or equivalent PC computer with one available PCI slot
	Windows® 98SE or later

Specifications:
	Version: v1.0
	Regulatory approval(s) : FCC Class B (DoC) and CE
	OS support: Windows® 98SE/2000/ME/XP
	Port type 1: 2 external and 1 internal USB 2.0 ports
	Port type 2: 1 external and 1 internal 1394a ports
	Port type 3: single shield RJ-45 connector for using at either speed
	Hot-swapping feature allows you to attach/detach USB and 1394 devices without powering down the system
	Full compliant with PCI Plug-n-Play 2.2
	USB 2.0 interface:
	- Compliant with USB specification rev. 2.0 - Supports high-speed (480Mbps), full-speed (12Mbps) and low-speed (1.5Mbps) data transfer modes for simultaneous operation of multiple USB 2.0/1.1 devices - Works with various types of USB devices including hubs, PC video cameras, printers, scanners CD- R/Ws, DVD-ROMs, memory card readers/writers, removable drives, digital cameras, and more
	1394a (FireWire®) interface:
	- IEEE 1394-1995, P1394a (rev.1.1) and OHCI Interface Specification 1.1 compliant - Supports serial bus data transfer rates of 100, 200 and 400Mb/sec - Works with various types of 1394 devices including DV camcorders/cameras, hard disk drives, CD- RWs, /DVD-ROMs, removable drives, scanners, and other audio/video devices
	10/100 Ethernet interface:
	- IEEE 802.3 standards 10BASE-T and 100BASE-TX standards - Wake-On-LAN feature is optional for different hardware version - Full-duplex operation at both 10Mbps auto-sensing capability - Rich diagnostic LED mounted on RJ-45 connector for easily viewing and troubleshooting - Single shield RJ-45 connector for using at either Speed (Category 3,4 or 5 UTP cable for 10Mbps Operation, and category 5 UTP cable for 100Mbps Operation) - Plug and Play Installation

Package Contents:
	USB 2.0+1394a+10/100 Ethernet PCI
	Quick installation quide
	Driver software