USB 2.0+1394a+10/100/1000 Combo-2

Part No. 1016-0018-000A
USB-IF TID: 50000732
( Product may vary from this image.)

 

Key Features & Benefits:
Combo card design adds USB 2.0 (480Mbps), 1394a (400Mbps) and 10/100/1000BASE-T Ethernet interface into your computer at once!
Supports various types of USB 2.0/1.1 and 1394a devices including removable drives, CD-RW/DVD-ROM drives, printers, scanners, memory card readers, hubs, digital cameras, DV-camcorders, PDA and more
Provides auto-sensing feature for full-duplex operations at 10Mbps, 100Mbps and 1000Mbps
System Requirements:
Pentium or equivalent PC computer with one available PCI slot
Windows® 98SE or later
Specifications:
Version: v1.0
Regulatory approval(s): FCC Class B (DoC) & CE (1998)
OS support: Windows® 98SE/ME/2000/XP
Port type 1: 2 external and 1 internal USB 2.0 ports
Port type 2: 2 external and 1 internal IEEE 1394a ports
Port type 3: single shielded RJ-45 connector
Hot-swapping feature allows you to attach/detach USB and 1394a devices without powering down the system
Built-in 4-pin power connector can be used to receive extra power supply from system
Full compliant with PCI Plug-n-Play 2.2
USB 2.0 interface:
 

- Compliant with USB specification rev. 2.0
- Supports high-speed (480Mbps), full-speed (12Mbps) and low-speed (1.5Mbps) data transfer modes   for simultaneous operation of multiple USB 2.0/1.1 devices
- Works with various types of USB devices including hubs, PC video cameras, printers, scanners CD-  R/Ws, DVD-ROMs, memory card readers/writers, removable drives, digital cameras, and more

1394a (FireWire®) interface:
  - IEEE 1394a-2000 and OHCI Interface Specification 1.1 compliant
- Supports serial bus data transfer rates of 100, 200 and 400Mb/sec
- Works with various types of 1394 devices including DV camcorders/cameras, hard disk drives, CD-  RWs, /DVD-ROMs, removable drives, scanners, and other audio/video devices
10/100/1000 Gigabit Ethernet interface:
  - Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
- Compliant with Media Access Controller (MAC) with triple-speed 10BASE-T, 100BASE-T and   1000BASE-T Ethernet on standard Category 5 UTP
- Provides Wake-On-LAN and ACPI features to achieve the most efficient power management
- Supports Crossover Detection and Auto-Correction to provide robust transmission and reception   capability at high speeds
- Full-duplex operation at 10Mbps, 100Mbps and 1000Mbps auto-sensing feature
- Self diagnostic LED mounted RJ-45 connector for easily viewing and troubleshooting
- Single shielded RJ-45 connector for using at all speeds
   
Package Contents:
USB 2.0+1394+10/100/1000 Combo
Wake-on-LAN cable
Quick installation quide
Driver software

 

| About US   | News   | Products   | Service & Support   | OEM/ODM   | Contact US

 


© 2012 AVLAB Technology Inc. All rights reserved.