 |
USB2.0+1394a+10/100 Ethernet PCI
Part No. 1016-0004-000B
|
| Key Features
& Benefits: |
|
Combo card design adds USB 2.0, 1394
(FireWire®) and Ultra ATA/133 interface into your computer at once! |
|
Supports various types of USB 2.0/1.1 and 1394
devices including removable drives, CD-ROM/DVD-ROM drives, printers, scanners,
memory card readers, hubs, digital cameras, DV-camcorders, PDA and more |
|
Full-duplex operation at both 10Mbps and 100Mbps |
|
|
Support 10/100 Mbps auto-sensing capability |
| System Requirements: |
|
|
Pentium or equivalent PC computer
with one available PCI slot |
|
Windows® 98SE or later |
| Specifications: |
|
|
Version: v1.0 |
|
|
Regulatory approval(s): FCC Class B (DoC) &
CE |
|
Chip set : 1394-TI, USB-NEC, Ethernet-Realtek |
|
OS support: Windows® 98SE/ME/2000/XP |
|
Port type 1: 2 external and 1 internal USB 2.0
ports |
|
Port type 2: 1 external and 1 internal 1394a
ports |
|
Port type 3: single shield RJ-45 connector for using at either
speed |
|
Hot-swapping feature allows you to attach/detach USB and 1394
devices without powering down the system |
|
Full compliant with PCI Plug-n-Play 2.2 |
|
USB 2.0 interface: |
| |
- Compliant with USB specification rev. 2.0
- Supports high-speed (480Mbps), full-speed (12Mbps) and low-speed (1.5Mbps)
data transfer modes for simultaneous operation of multiple USB
2.0/1.1 devices
- Works with various types of USB devices including hubs, PC video cameras,
printers, scanners CD- R/Ws, DVD-ROMs, memory card readers/writers,
removable drives, digital cameras, and more |
|
1394a (FireWire®) interface: |
| |
- IEEE 1394-1995, P1394a (rev.1.1) and OHCI Interface Specification 1.1
compliant
- Supports serial bus data transfer rates of 100, 200 and 400Mb/sec
- Works with various types of 1394 devices including DV camcorders/cameras,
hard disk drives, CD- RWs, /DVD-ROMs, removable drives, scanners,
and other audio/video devices |
|
10/100 Ethernet interface: |
| |
- IEEE 802.3 standards 10BASE-T and 100BASE-TX standards
- Wake-On-LAN feature is optional for different hardware version
- Full-duplex operation at both 10Mbps auto-sensing capability
- Rich diagnostic LED mounted on RJ-45 connector for easily viewing and
troubleshooting
- Single shield RJ-45 connector for using at either Speed (Category 3,4
or 5 UTP cable for 10Mbps Operation, and category 5 UTP cable
for 100Mbps Operation)
- Plug and Play Installation |
| Package Contents: |
|
USB 2.0+1394a+10/100 Ethernet PCI |
|
Quick installation quide |
|
Driver software |