 |
USB 2.0+1394a+10/100/1000 Combo-2
Part No. 1016-0018-000A
|
| Key Features
& Benefits: |
|
Combo card design adds USB 2.0 (480Mbps),
1394a (400Mbps) and 10/100/1000BASE-T Ethernet interface into your computer
at once! |
|
|
Supports various types of USB 2.0/1.1 and 1394a
devices including removable drives, CD-RW/DVD-ROM drives, printers, scanners,
memory card readers, hubs, digital cameras, DV-camcorders, PDA and more |
|
Provides auto-sensing feature for full-duplex
operations at 10Mbps, 100Mbps and 1000Mbps |
| System Requirements: |
|
|
Pentium or equivalent PC computer
with one available PCI slot |
|
Windows® 98SE or later |
| Specifications: |
|
|
Version: v1.0 |
|
|
Regulatory approval(s): FCC Class B (DoC) &
CE (1998) |
|
|
Chip set: 1394a-TI, USB 2.0-NEC, Gigabit Ethernet-Realtek |
|
|
OS support : Windows®
98SE/ME/2000/XP |
|
|
Port type 1: 2 external and 1 internal USB 2.0
ports |
|
Port type 2: 2 external and 1 internal IEEE 1394a
ports |
|
Port type 3: single shielded RJ-45 connector
|
|
Hot-swapping feature allows you to attach/detach USB and 1394a
devices without powering down the system |
|
Built-in 4-pin power connector can be used to
receive extra power supply from system |
|
Full compliant with PCI Plug-n-Play 2.2 |
|
USB 2.0 interface: |
| |
- Compliant with USB specification rev. 2.0
- Supports high-speed (480Mbps), full-speed (12Mbps) and low-speed (1.5Mbps)
data transfer modes for simultaneous operation of multiple USB
2.0/1.1 devices
- Works with various types of USB devices including hubs, PC video cameras,
printers, scanners CD-R/Ws, DVD- ROMs, memory card readers/writers,
removable drives, digital cameras, and more |
|
1394a (FireWire®)
interface: |
| |
- IEEE 1394a-2000 and OHCI Interface Specification 1.1 compliant
- Supports serial bus data transfer rates of 100, 200 and 400Mb/sec
- Works with various types of 1394 devices including DV camcorders/cameras,
hard disk drives, CD-RWs, /DVD- ROMs, removable drives, scanners,
and other audio/video devices |
|
10/100/1000 Gigabit Ethernet interface: |
| |
- Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
- Compliant with Media Access Controller (MAC) with triple-speed 10BASE-T,
100BASE-T and 1000BASE-T Ethernet on standard Category 5 UTP
- Provides Wake-On-LAN and ACPI features to achieve the most efficient power
management
- Supports Crossover Detection and Auto-Correction to provide robust transmission
and reception capability at high speeds
- Full-duplex operation at 10Mbps, 100Mbps and 1000Mbps auto-sensing feature
- Self diagnostic LED mounted RJ-45 connector for easily viewing and troubleshooting
- Single shielded RJ-45 connector for using at all speeds |
| Package Contents: |
|
USB 2.0+1394+10/100/1000 Combo |
|
Wake-on-LAN cable |
|
Quick installation quide |
|
Driver software |