Serial
ATA RAID PCI
Part No. 1006-0061-000B
|
|
| Serial
ATA RAID PCI |
|
| Key Features & Benefits: | |
|
|
Supports RAID 0 (stripping) for performance and RAID 1 (mirroring) for reliability! |
|
Coexists with Ultra ATA controller and allows you connect up to 2 SATA hard disks |
|
Breaks the 137GB barrier! Works with various brands of large capacity Serial ATA hard disks |
| System Requirements: | |
|
|
Pentium or equivalent computer with an available PCI slot |
|
Windows® 98SE or later |
| Specifications: | |
|
|
Version: v1.0 |
|
|
Regulatory approval(s): FCC Class B (DoC) & CE (1998) |
|
Chip: Silicon Image 3112A |
|
OS support: Windows® 98SE/ME/NT4.0/2000/XP |
|
Port type: Two SATA 7-Pin standard receptacle connectors |
|
Slot type: 32-bit PCI |
|
Compliant with Serial ATA specification, rev. 1.0 and PCI specification, rev. 2.2 |
|
Supports RAID 0 (stripping) for performance and RAID 1 (mirroring) for reliability! |
|
Supports data transfer rates up to 3.0Gbps (300MB/sec) |
|
Provides two independent channels to connect up to two SATA/SATA II HDDs |
|
Supports RAID 0 (stripping) for performance and RAID 1 (mirroring) for reliability! |
|
Coexists with Ultra ATA controller and allows you connect up to 2 SATA hard disks |
|
Supports 32-bit wide PCI bus at 66MHz and data transfer rates up to 150MB/s (1.5Gb/s) |
|
Features independent 256-byte FIFOs per channel for host reads and writes |
|
Features Watch Dog timer for fault resiliency and flash memory for future BIOS upgrade Breaks the 137GB barrier! Supports various types of large capacity Serial ATA hard disks |
| Package Contents: | |
|
Serial ATA RAID PCI card |
|
Two Serial ATA cables |
|
Two 15-pin Serial ATA power cables |
|
Quick installation quide |
|
Driver software |