Ultra ATA/133 RAID Controller

Part No. 1006-0052-000C
( Product may vary from this image.)

Key Features & Benefits:
RAID configurations protect your system from catastrophic disk failures and system down time while doubling the data transfer rates of your hard disk drives
Breaks the 137GB barrier! Supports various types of large capacity hard disk drives. And achieves burst data transfer rates up to 133MB/sec when connect to Ultra ATA/133 drives
System Requirements:
Pentium-class PC computers with one available PCI slot
Windows® 98SE or later
Version: v3.0
Regulatory approval(s): FCC Class B (DoC) & CE (1998)
Chip set: CMD (Silicon Image)
OS support: Windows® 98SE/ME/NT4.0/2000/XP/Server 2003/Vista
Slot type: 32-bit PCI
Port type: Two IDE 40-pin connectors
  - Compliant with Ultra ATA/133 specification and PCI v2.2/v2.1 Plug-n-Play
- Full backward support for Ultra ATA/100/66/33 standards
- On-board flash BIOS for future upgrade
Data Transfer Modes supported:

- Supports Ultra DMA (0-6) and Multi-word DMA mode (0-2), and PIO mode (0-4)
- Achieves burst data transfer rates up to 133MB/sec
- CRC error-checking provides data verification and achieves flawless data trans

Device Support:
  - Breaks the 137GB barrier! Supports various types of large capacity hard disk drives
- Supports various brands of Ultra ATA 133/100/66/33 hard disk drives
- Coexists with on-board IDE controller and allows you connect up to 4 IDE devices
RAID Features:
  - RAID 0 (striping) interleaves data across multiple hard disk drives, which increases disk system   performance dramatically
- RAID 1 (Mirroring) simultaneously writes data to two hard drives for data redundancy
- RAID 0+1 (Mirroring + Striping) the best of both worlds – combines mirroring and striping – four hard   drives required for this mode.
- Acts as a conventional (non-RAID) controller when not configured for RAID
- On-board BIOS supports booting from attached hard drive or stripe set
Advanced Features:
  - Auto-detects drive types and fine tunes to the best performance for each Ultra ATA hard disk drives
- Support scatter/gather, multi-threaded, multi-tasking and automatic FIFO threshold selection
- Provides two independent Ultra ATA channels for faster data transfer Full support ACPI (Advanced   Configuration and Power Interface) for advanced system power management
Package Contents:
Ultra ATA/133 RAID Controller
Two 40-pin/80-wire Ultra ATA flat cables
Quick installation quide
Driver software


| About US   | News   | Products   | Service & Support   | OEM/ODM   | Contact US


© 2012 AVLAB Technology Inc. All rights reserved.